Previous
Next
Livraison offerte dès 89€ d'achat en point relais
Backstand Affûteuse de Couteaux
0/5Equipment specifically intended for sharpening, ideal for finishing touches and maintenance of your knives. 420 W of power.
€609.00
€730.80
Tax included
Sur commande ou attente de réapprovisionnement
Equipment specifically intended for sharpening, ideal for finishing touches and maintenance of your knives.
The direction of rotation of the belt is reversed to visualize the grinding.
1 side with a grinding belt of 50x800 mm with a contact wheel, a part of the belt is loose, and it has a planning table.
Belt speed: 15m/s.1 side felt disc with a diameter of 175 mm to take off the burr and maintain your blades.
Disc speed: 2860 turns/minutesGrinding machine Backstand 800 C delivered with:
• 1 belt 50x800 Norax Grain X45 finishing.
• 1 rub felt 175 mm
• 1 Polishing bar for sharpening hoof knives and knives.
Warning: This machine is not a belt sander for material removal.
It is only intended for sharpening. Use other than its sharpening function may damage the engine.
- Dimensions: W 250 x D 450 x H 200 mm.
- Supply voltage: 220 Volts single-phase.
- Power: 420 W.
- Disc speed: 2860 rpm.
- Belt speed: 15 m/second.
- Contact wheel: diameter 100 mm.
- Felt disc: diameter 175 mm.
- Strip: 800x50 mm.
- Weight: 10.5 kg.
Equipment specifically intended for sharpening, ideal for finishing touches and maintenance of your knives.
The direction of rotation of the belt is reversed to visualize the grinding.
1 side with a grinding belt of 50x800 mm with a contact wheel, a part of the belt is loose, and it has a planning table.
Belt speed: 15m/s.1 side felt disc with a diameter of 175 mm to take off the burr and maintain your blades.
Disc speed: 2860 turns/minutesGrinding machine Backstand 800 C delivered with:
• 1 belt 50x800 Norax Grain X45 finishing.
• 1 rub felt 175 mm
• 1 Polishing bar for sharpening hoof knives and knives.
Warning: This machine is not a belt sander for material removal.
It is only intended for sharpening. Use other than its sharpening function may damage the engine.
- Dimensions: W 250 x D 450 x H 200 mm.
- Supply voltage: 220 Volts single-phase.
- Power: 420 W.
- Disc speed: 2860 rpm.
- Belt speed: 15 m/second.
- Contact wheel: diameter 100 mm.
- Felt disc: diameter 175 mm.
- Strip: 800x50 mm.
- Weight: 10.5 kg.
Les avis sur notre produit
Comments (0)
Vous aimerez aussi...
Abrasive belt 25x800 and 50x800 NORTON
Belt compatible with the Grinder 800C and the Backstand Polette 6 NE.
€4.80
€5.76
