Livraison offerte dès 89€ d'achat en point relais
0/5With comfort neck straps, cowhide leather, single layer
Cowhide leather, sewn with aramid thread. The hides have been rigorously selected. Soft and resistant leather.
Thickness: 1,40 mm (± 0,10mm). With bib. Tightening by leather strap and adjustable buckle. Quick and easy adjustment system in the back (make a knot with the straps).
Color : brown.
Length : 90 cm.
Width : 70 cm.
Weight : 1,18 kg.
Recommended for manual welding techniques with light spatter and droplet formation, e.g. gas welding, TIG welding, MIG welding, plasma micro-welding, brazing, spot welding, MMA welding, rutile coated electrode.
Recommended for manual welding techniques with large metal spatter, e.g. MMA welding (basic coated electrode or c ellulose coated electrode), MAG welding (with CO2 or gas mixture), MIG welding (with high current), self-protected flux-cored wire arc welding, plasma fusion cutting, calibration, flame cutting, thermal spraying The apron is designed to protect against accidental and short term electrical contact.
This protective equipment has been designed according to the following European standards:
- EN ISO 11611 : 2007. Protective clothing used during welding and related techniques. Class 2 - A1+A2.
- EN ISO 11612: 2008. Protective clothing against heat and flame. A1 A2 B2 C1 E1 F2 .
It complies with Regulation (EU) 2016/425 on Personal Protective Equipment (PPE). Category II.
Cowhide leather, sewn with aramid thread. The hides have been rigorously selected. Soft and resistant leather.
Thickness: 1,40 mm (± 0,10mm). With bib. Tightening by leather strap and adjustable buckle. Quick and easy adjustment system in the back (make a knot with the straps).
Color : brown.
Length : 90 cm.
Width : 70 cm.
Weight : 1,18 kg.
Recommended for manual welding techniques with light spatter and droplet formation, e.g. gas welding, TIG welding, MIG welding, plasma micro-welding, brazing, spot welding, MMA welding, rutile coated electrode.
Recommended for manual welding techniques with large metal spatter, e.g. MMA welding (basic coated electrode or c ellulose coated electrode), MAG welding (with CO2 or gas mixture), MIG welding (with high current), self-protected flux-cored wire arc welding, plasma fusion cutting, calibration, flame cutting, thermal spraying The apron is designed to protect against accidental and short term electrical contact.
This protective equipment has been designed according to the following European standards:
- EN ISO 11611 : 2007. Protective clothing used during welding and related techniques. Class 2 - A1+A2.
- EN ISO 11612: 2008. Protective clothing against heat and flame. A1 A2 B2 C1 E1 F2 .
It complies with Regulation (EU) 2016/425 on Personal Protective Equipment (PPE). Category II.
