Degreaser and activator for acrylic resins

The DEGREASER and ACTIVATOR is used to efficiently prepare surfaces to be bonded and to strengthen bonding adhesion of acrylic resins on the horn, aluminium, steel, plastic and rubber.

COMPOSITION :
Isopropyl alcohol (propan-2-ol, Isopropanol). 

CONSEILS D'UTILISATION :
For optimal surface preparation :
1) Clean the surfaces to be bonded with a clean cloth soaked in the Degreaser and Activator.
2) Sand the surfaces with fine sandpaper (180-grit).
3) Clean again with the Degreaser and Activator to ensure all sanding residue is removed. 

Available in 500 ml spray.

Hazard statements :
Highly flammable liquid and vapour. Causes serious eye irritation. May cause drowsiness or dizziness.
Safety advice and precautions for use: Take precautionary measures against electrostatic discharge. Use only outdoors or in a well-ventilated place. Wear protective gloves/protective clothing/eye protection/face protection. IN THE EVENT OF CONTACT WITH SKIN (or hair): Remove contaminated clothing immediately. Rinse skin with water/shower. IF INHALED: Remove the exposed individual to fresh air and keep them at rest in a position that is comfortable for breathing. IN THE EVENT OF CONTACT WITH EYES: Rinse cautiously with water for several minutes. Check for and remove contact lenses if they can be removed easily. Continue to rinse.
Dispose of contents/container in accordance with local/regional/national/international regulations.
Store in a well-ventilated place. Keep the container closed and sealed. Other hazards : Vapours may form an explosive mixture with air.
Identification: Isopropanol CAS N°: 67-63-0. REACH N°: 01-2119457558-25.
Raw material for photochemical products, for cleaning agents and disinfectants. Solvent. Industrial use.